Jedi Survivor, the highly anticipated sequel to the 2019 hit game Jedi Fallen Order, was finally released earlier this year. The game has received widespread critical acclaim for its engaging storytelling, addictive gameplay, and stunning visuals. However, some players have encountered an error message reading “Low-Level Fatal Error” which prevents the game from launching properly.
This error can be incredibly frustrating, especially for fans who have waited years for the sequel. But don’t worry – in most cases, this issue can be easily fixed with a few simple troubleshooting steps. In this comprehensive guide, we’ll walk you through everything you need to know about the low level of Fatal Error in Jedi Survivor, including what causes it, how to fix it, and some preventative measures you can take.
What Causes the Low-Level Fatal Error in Jedi Survivor?
There are a few potential causes for the Low Level Fatal Error message:
- Outdated or corrupt game files: Like any game, Jedi Survivor relies on various files and caches to run properly. If any of these become outdated or corrupted, it can prevent the game from launching and trigger the error.
- Graphics driver issues: Problems with your graphics card drivers can sometimes lead to conflicts that cause the error. Keeping your drivers fully updated is key.
- System file corruption: Your Windows system files are essential for games to interact with your OS properly. If any system files become corrupted, it can cause all sorts of issues.
- Hardware incompatibilities: Certain combinations of hardware have been known to cause issues with running Jedi Survivor. This includes using older or low-end GPUs and CPUs.
- Full hard drive: If your main Windows hard drive is nearly full, it can cause all sorts of performance issues and prevent games from launching correctly.
So in summary, the level of Fatal Error is usually caused by some type of file corruption, system conflict, or hardware incompatibility. The good news is none of these are difficult to identify and address.
How to Fix the Low-Level Fatal Error in Jedi Survivor
If you’ve encountered the frustrating Low-Level Fatal Error message, here are some step-by-step solutions to get Jedi Survivor up and running again:
- Update Your Graphics Drivers
The first step is to make sure your Nvidia or AMD graphics drivers are fully updated. Outdated drivers are a common cause of conflicts and errors. Follow these steps:
- For Nvidia cards, open the GeForce Experience app. Go to the Drivers section and check for any available updates.
- For AMD cards, go to the AMD website and find the auto-detect tool. Run it and install any recommended driver updates.
- Restart your PC once the updates are installed.
- Verify Your Game Files
Corrupted or missing game files can certainly cause crashes on launch. Verify your game files through whichever platform you purchased Jedi Survivor on:
Steam: Right-click Jedi Survivor > Properties > Local Files tab > Verify Integrity of Game Files.
Epic: Click the Settings cog beside Launch > Verify
Origin: Right-click Jedi Survivor > Repair
This will check all game files and replace anything corrupted or missing.
- Update Windows and Disable Background Apps
Sometimes system file corruption and background processes interfere with games launching correctly. Do the following:
- Open Windows Update and install the latest system updates
- Restart your PC
- Open Task Manager > Startup tab. Disable any unnecessary startup programs.
- Right-click the taskbar > Task Manager > Services tab. Stop any unnecessary background services.
This will ensure your OS files are up to date and reduce potential conflicts with other apps.
- Check Available Disk Space
Low disk space can negatively impact game performance and cause errors. Make sure your primary hard drive where Windows is installed has at least 15-20% free space available.
Uninstall unneeded programs, move files to external storage, or run the Disk Cleanup utility to free up space.
- Adjust Graphics Settings
If you’re using an older or low-end GPU, adjusting the in-game graphics settings to be less demanding may help resolve crashes. Open the game’s settings and:
- Lower the graphics quality presets
- Reduce the resolution
- Turn off taxing settings like ray tracing or anti-aliasing
While not ideal, lowering these settings reduces the load on your hardware and may prevent the error.
- Update BIOS and Chipset Drivers
Outdated motherboard drivers can also sometimes lead to system instability and game crashes.
- Update BIOS to the latest version from your motherboard manufacturer’s website
- Get the latest chipset drivers from AMD or Intel depending on your processor
This optimizes how your components communicate together.
- Disable Overclocks
If you have any overclocks applied to your GPU, CPU, or RAM, try resetting back to default speeds. Overclocks that are unstable can cause games to crash.
Reverting to default clocks removes this potential factor. You can re-enable overclocking gradually if the issue is fixed.
- Perform a Clean Boot
As a last resort, doing a clean boot in Windows can isolate software conflicts.
- Reboot your PC
- As it’s loading, hold F8 to get the Advanced Boot Options
- Select “Disable Driver Signature Enforcement”
- Once booted, go to msconfig
- Check “Selective Startup” and uncheck “Load Startup Items”
- Click OK and restart
This will boot Windows with only basic drivers and services. Test launching Jedi Survivor now. If the issue persists, it points to a hardware-related cause. If it’s fixed, it indicates a conflict with software/drivers.
Preventing the Low-Level Fatal Error in the Future
Once you’ve resolved the immediate issue using the steps above, here are some tips to help avoid the Low-Level Fatal Error recurring in Jedi Survivor:
- Periodically verify your game files through Steam, Epic, Origin, etc. This catches corrupted files before they can cause problems.
- Keep your graphics drivers, Windows, and BIOS updated consistently. Don’t let them become outdated over time.
- Monitor your disk space and clear your room regularly so you always have adequate free space.
- Refrain from overclocking components like CPU, RAM, or GPU. If you do, stress test for stability.
- Before major Windows updates, create a system restore point you can roll back to if issues occur.
- Consider upgrading to a more powerful GPU/CPU if your hardware is aging. This gives more headroom.
- Set the game to launch as an Administrator to grant full access rights. Right-click> Properties > Compatibility tab.
Following these tips diligently reduces the chances of corrupting game files, driver conflicts, hardware bottlenecks, and other culprits that commonly trigger the error.
Frequently Asked Questions About the Low-Level Fatal Error Jedi Survivor
Here are answers to some frequently asked questions about troubleshooting the Low-Level Fatal Error in Jedi Survivor:
Q: Do I need to reinstall the game to fix the error?
A: In most cases no, you can resolve it without a full reinstall using the steps listed above. Only reinstall as a last resort.
Q: Can upgrading my PC hardware fix it?
A: Possibly, if the issue stems from having an underpowered GPU, CPU, or insufficient RAM. But try the other steps first before spending on new hardware.
Q: Is the Level of Fatal Error specific to Jedi Survivor?
A: Not necessarily – it can potentially happen in other graphically demanding games too. But it seems especially common with Jedi Survivor at the moment.
Q: Will updating BIOS cause me to lose data or custom settings?
A: Updating BIOS is safe and will not cause data loss. But it’s wise to manually back up any custom OC profiles or settings first.
Q: Could third-party software like RGB lighting apps be causing the error?
A: Yes, third-party apps can sometimes conflict – try closing them as part of the clean boot process.
Q: I keep having the issue return even after fixing it – what should I do?
A: At that point, try reinstalling the game itself from scratch onto a different drive. Also, consider backing up files and doing a Windows reinstallation.
Dealing with constant game crashes and errors like the Low-Level Fatal Error can certainly be a headache, especially with a highly anticipated title like Jedi Survivor. Thankfully, pinpointing the cause and applying the appropriate fix is usually achievable with some diligent troubleshooting.
The vast majority of cases come down to corrupted data, driver conflicts, insufficient hardware, or software clashes – all of which can be addressed with one or more of the solutions provided. Persistence and methodically working through each will ultimately get Jedi Survivor back up and running smoothly.
While some trial and error may be required, don’t hesitate to leverage community resources like gaming forums if you continue having difficulties. With the tips in this guide, you should be well on your way to enjoying everything Jedi Survivor has to offer without the frustration of crashes and errors. May the force be with you!
Faizan Ahmad is a technology writer and enthusiast based in Uttar Pradesh, India. He is the editor-in-chief of GizmoConcept, a leading tech news and review site.
Faizan started GizmoConcept in 2017 as a platform to share his passion for the latest gadgets and innovations. What began as a hobby blog quickly grew into one of the most popular Indian tech sites, read by over 5 million people each month.
Under Faizan’s leadership, GizmoConcept provides breaking news, in-depth reviews, and insightful commentary on everything from smartphones and laptops to smart home tech and electric vehicles. The site is known for its focus on South Asian markets and thorough, unbiased analysis of the latest products.
When he’s not writing or running GizmoConcept, Faizan enjoys spending his time with his family. He’s always on the lookout for exciting startups and technological advancements that have the potential to transform people’s lives.
His goal with GizmoConcept is to make cutting-edge technology accessible and easy to understand for everyone.